Command Line Reference Guide

id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to
4094. Only information on the VLAN specified is displayed.
name vlan-name (OPTIONAL) Enter the keyword name followed by the name
configured for the VLAN. Only information on the VLAN named is
displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show vlan command shown in the Example below.
Column Heading Description
(Column 1 — no
heading)
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word Active for
active VLANs.
Q
• Displays G for GVRP tagged
• M for member of a VLAN-Stack VLAN
• T for tagged interface
• U (for untagged interface)
• x (not capitalized x) for Dot1x untagged
• X (capitalized X) for Dot1x tagged
Ports Displays the type, slot, and port information.
• Gi = gigabit ethernet
• Te = 10 gigabit ethernet
• Fo = 40 gigabit ethernet
• Po = port channel
Example
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C -
Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
825