Command Line Reference Guide
Usage
Information
To display information about a named VLAN, enter the show vlan command with the name
parameter or the show interfaces description command.
Related
Commands
description – assigns a descriptive text string to the interface.
interface vlan – configures a VLAN.
show vlan – displays the current VLAN configurations on the switch.
show config
Display the current configuration of the selected VLAN.
S5000
Syntax
show config
Command Modes INTERFACE VLAN
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
FTOS(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
S5000
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following
information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
824