Command Line Reference Guide
Defaults The Default VLAN is VLAN 1.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-id 1).
The Default VLAN contains only untagged interfaces.
Related
Commands
interface vlan – configures a VLAN.
default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configured as a
member of another VLAN.
S5000
Defaults Enabled.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
no default vlan disable is not listed in the running-configuration, but when the
default VLAN is disabled, default-vlan disable is listed in the running-configuration.
name
Assign a name to the VLAN.
S5000
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name
Enter up to 32 characters as the name of the VLAN.
Defaults Not configured.
Command Modes INTERFACE VLAN
Command History
Version 9.0(1.3) Introduced on the S5000.
823