Command Line Reference Guide

Related
Commands
show mac accounting access-list – displays the MAC access list configurations and counters
(if configured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
S5000
Syntax
show mac learning-limit [violate-action] [detail] [interface
type slot/port ]
Parameters
violate-action (OPTIONALY) Enter the keywords violate-action to display the
MAC learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning
limit in detail.
interface
type
slot/port
(OPTIONAL) Enter the keyword interface followed by interface
type and slot/port or number information. Valid slot numbers are 0-11.
The valid port numbers for each interface type are listed below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show mac learning-limit interface ten 1/0
Interface Learning Dynamic Static Unknown SA
Slot/port Limit MAC count MAC count Drops
Te 1/0 10 0 0 0
821