Command Line Reference Guide
banner exec
Configure a message that is displayed when your enter EXEC mode.
S5000
Syntax
banner exec c line c
Parameters
c
Enter the keywords banner exec, then enter a character
delimiter, represented here by the letter
c
. Press ENTER.
line
Enter a text string for your banner message, ending the message with
a delimiter character. In the example below, the delimiter is a percent
sign (%). Range: maximum 50 lines, up to 255 characters per line.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Optionally, use the banner exec command to create a text string that is displayed when you
access EXEC mode. The exec-banner command toggles that display.
Example
FTOS(conf)#banner exec ?
LINE c banner-text(max length 255) c, where 'c' is a
delimiting character
FTOS(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is your banner message.%
FTOS(conf)#end
FTOS#exit
4d21h5m: %STKUNIT0-M:CP %SEC-5-LOGOUT: Exec session is
terminated for user on line
console
This is the banner
FTOS con0 now available
Press RETURN to get started.
4d21h6m: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful
for user on line
console
This is the banner
FTOS>
Related
Commands
banner login – sets a banner for login connections to the system.
banner motd – sets a Message of the Day banner.
exec-banner – Enables the display of a text string when you enter EXEC mode.
line – enables and configures the console and virtual terminal lines to the system.
82