Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
show cam mac stack-unit
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for MAC ACLs.
S5000
Syntax
show cam mac stack-unit unit-number [port-set port-pipe]
[address [mac-addr]| dynamic | static | [interface type slot/
port] | [vlan vlan-id]
Parameters
stack-unit
unit-
number
(REQUIRED) Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11.
port-set
port-pipe
(REQUIRED) Enter the keywords port-set followed by a Port-Pipe
number to select the Port-Pipe for which to gather information. The
range is 0 or 1.
address
mac-
addr
(OPTIONAL) Enter the keyword address followed by a MAC
address in the nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses learned dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only those MAC
address specifically configured on the switch.
interface
type
slot/port
(OPTIONAL) Enter the keyword interface followed by the
interface type and slot/port or number information. Valid slot numbers
are 0-11. The valid port numbers for each interface type are listed
below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
vlan
vlan-id
(OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
EXEC
816