Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
For information about the specific trap sent and the corresponding Syslog, refer to the SNMP
Traps chapter.
mac-address-table station-move refresh-arp
Ensure that address resolution protocol (ARP) refreshes the egress interface when a station move occurs due to a
topology change.
S5000
Syntax
[no] mac-address-table station-move refresh-arp
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
For details about using this command, refer to the “NIC Teaming” section of the Layer 2
chapter in the FTOS Configuration Guide .
mac learning-limit
Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface.
S5000
Syntax
mac learning-limit [address_limit ] | [learn-limit-violation] |
[station-move-violation]
Parameters
address_limit Enter the maximum number of MAC addresses that can be learned on
the interface. The range is 1 to 1000000.
learn-limit-
violation
(OPTIONAL) Enter the learn-limit-violation keyword to
specify an action when the learn limit is reached.
station-move-
violation
(OPTIONAL) Enter the keywords station-move to specify an
action when the station move limit is reached.
Defaults Default behavior is dynamic.
NOTE: “Static” means manually entered addresses, which do not age.
812