Command Line Reference Guide

A - Active LACP, B - Passive LACP, C - Short Timeout, D - Long

Timeout

E - Aggregatable Link, F - Individual Link, G - IN_SYNC, H -

OUT_OF_SYNC

I - Collection enabled, J - Collection disabled, K -

Distribution enabled L - Distribution disabled,

M - Partner Defaulted, N - Partner Non-defaulted, O - Receiver

is in expired state,

P - Receiver is not in expired state

Port Te 10/6 is enabled, LACP is enabled and mode is lacp

Actor Admin: State ACEHJLMP Key 1 Priority 128

Oper: State ACEGIKNP Key 1 Priority 128

Partner Admin: State BDFHJLMP Key 0 Priority 0

Oper: State BCEGIKNP Key 1 Priority 128

FTOS#

Example (Sys-id)

FTOS#show lacp 1 sys-id

Actor System ID: Priority 32768, Address 0001.e800.a12b

Partner System ID: Priority 32768, Address 0001.e801.45a5

FTOS#

Example

(Counter)

FTOS#show lacp 1 counters

----------------------------------------------------

LACP PDU Marker PDU Unknown Illegal

Port Xmit Recv Xmit Recv Pkts Rx Pkts Rx

-----------------------------------------------------

Te 10/6 200 200 0 0 0 0

FTOS#

Commands

clear lacp counters – clears the LACP counters.

show interfaces port-channel – displays information on configured Port Channel groups.

808