Command Line Reference Guide
Bootflash image upgrade for stack-unit 0 completed
successfully.
upgrade system (standalone unit)
Upgrade the FTOS image on a standalone S5000 switch.
S5000
Syntax
upgrade system {flash://file-path | ftp://file-path | scp://
file-path | tftp://file-path | usbflash://file-path} {A: | B:}
Parameters
system Enter the keyword system to change the FTOS image.
flash: After the keyword flash:, enter the location of the source file in the
internal flash in the format: //file-path or press Enter to launch
a prompt sequence.
ftp: After the keyword ftp:, enter the location of the source file in the
format: //userid:password@host-ipaddress/file-
path or press Enter to launch a prompt sequence.
scp: After the keyword scp:, enter the location of the source file in the
format: //userid:password@host-ip-address/file-
path
or press Enter to launch a prompt sequence.
tftp: After the keyword tftp:, enter the location of the source file in the
format: //host-ip-address/file-path or press Enter to
launch a prompt sequence.
usbflash: After the keyword usbflash:, enter the location of the source file
in the external flash in the format: usbflash://filepath or
press Enter to launch a prompt sequence.
file-path
Enter the path and filename to be used to upgrade the FTOS image.
A:
|
B:
Enter the FTOS partition to be upgraded with the new image.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#upgrade system ?
flash: Copy from flash file system (flash://filepath)
ftp: Copy from remote file system, IPv4 or IPv6, (ftp://
userid:password@hostip/filepath)
scp: Copy from remote file system, IPv4 or IPv6, (scp://
userid:password@hostip/filepath)
stack-unit: Sync image to the stack-unit
tftp: Copy from remote file system, IPv4 or IPv6, (tftp://
hostip/filepath)
79