Command Line Reference Guide

Parameters
number Enter a number as the maximum number of parallel paths an IP
routing installs in a routing table. The range is 1 to 16. The default is 4.
Defaults 4
Command Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command History
Version 9.0(1.3) Introduced on the S5000.
metric-style
Configure a router to generate and accept old-style, new-style, or both styles of type, length, and values (TLV).
S5000
Syntax
metric-style [level-1 | level-2]
To return to the default values, use the no metric-style [level-1 | level-2]
command.
Parameters
level-1 Enables the metric style on Level 1.
level-2 Enables the metric style on Level 2.
Command Modes ROUTER ISIS
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you enter the metric-style wide command, the FTOS generates and accepts only
new-style TLVs. The router uses less memory and other resources rather than generating both
old-style and new-style TLVs.
The new-style TLVs have wider metric fields than old-style TLVs.
Related
Commands
isis metric – use this command to configure a metric for an interface.
783