Command Line Reference Guide

* Warning - Upgrading boot selectors is inherently risky
and should *
* only be attempted when necessary. A failure at this
upgrade may *
* cause a board RMA. Proceed with
caution ! *
***************************************************************
********
Proceed upgrade Boot Selector image for stack-unit 0 [yes/no]:
yes
Programming
!.!!.!.!.!!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!
!.!.!.!!.!.!.!.
Bootselector image upgrade for stack-unit 0 completed
successfully.
FTOS#upgrade boot bootflash-image stack-unit 0 booted
Current BootFlash information in the system:
===============================================
Card BootFlash Current Version
New Version
---------------------------------------------------------------
---------
Unit0 Boot Flash B
1.3.1.1 1.3.1.2
***************************************************************
********
* Warning - Upgrading boot flash is inherently risky and
should only *
* be attempted when necessary. A failure at this upgrade
may cause *
* a board RMA. Proceed with
caution ! *
***************************************************************
********
Proceed upgrade Boot Flash image for stack-unit 0 [yes/no]: yes
Programming
!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.
!.!!.!.!!.!.!.!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!May 14
19:23:21: %STKUNIT0-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu
usage of management-unit is above threshold. Cpu1minUsage (88%)
May 14 19:23:21: %STKUNIT0-M:CP %SYSADM-5-TASK_CPU_THRESHOLD:
1min cpu utilization of management-unit has exceeded the
threshold. Top three processes are sysdlp (79.60%), system
(7.33%), sysd (1.11%)
.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!!.!.!.!.
!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!!.!.
!.!.!!.!.!!.!.!.!!.!.!.!!.!.!!.!.!!.!.!.!!.!.!!.!.!.!!.!.!!.!.!
!.!.!.!!.!.!.!!.!.!.!
78