Command Line Reference Guide

Defaults No default password.
Command Modes ROUTER ISIS
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The domain password is inserted in Level 2 link state PDUs (LSPs), complete sequence number
PDUs (CSNPs), and partial sequence number PDUs (PSNPs).
Related
Commands
• area-password – configures an IS-IS area authentication password.
• isis priority – configures the authentication password for an interface.
graceful-restart ietf
Enable graceful restart on an IS-IS router.
S5000
Syntax
graceful-restart ietf
To return to the default, use the no graceful-restart ietf command.
Parameters
ietf Enter ietf to enable graceful restart on the IS-IS router.
Defaults Graceful restart disabled.
Command Modes ROUTER ISIS
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Every graceful restart enabled router’s HELLO PDUs includes a restart TLV. This enables the
(re)starting as well as the existing ISIS peers to detect the GR capability of the routers on the
connected network. A flag in the Restart TLV contains restart request (RR), restart
acknowledge (RA) and suppress adjacency advertisement (SA) bit flags.
The ISIS graceful restart-enabled router can co-exist in mixed topologies where some routers
are graceful restart-enabled and others are not. For neighbors that are not graceful restart-
enabled, the restarting router brings up the adjacency per the usual methods.
765