Command Line Reference Guide
Defaults Not configured.
Command Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
• distribute-list out – suppresses networks from being advertised in updates.
• redistribute – redistributes routes from one routing domain to another routing domain.
distribute-list out
Suppress network prefixes from being advertised in outbound updates.
S5000
Syntax
distribute-list prefix-list-name out [connected | bgp as number
| ospf process-id | rip | static]
To return to the default values, use the no distribute-list prefix-list-name
out [bgp as number connected | ospf process-id | rip | static]
command.
Parameters
prefix-list-name
out
Specify the prefix list to filter prefixes in routing updates followed by
the keyword out.
connected (OPTIONAL) Enter the keyword connected for directly connected
routing processes.
ospf
process-id
(OPTIONAL) Enter the keyword ospf followed by the OSPF process-
ID number. The range is 1 to 65535.
bgp
as number
(OPTIONAL) Enter the BGP followed by the AS Number. The range is 1
to 65535.
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-configured routing
process.
Defaults Not configured.
Command Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command History
Version 9.0(1.3) Introduced on the S5000.
763