Command Line Reference Guide

metric value in the default-information originate command is set to a number
higher than 63, the metric value advertised in the LSPs is 63. If the metric-style command
is set for Wide mode, the metric value in the
default-information originate
command is advertised.
Related
Commands
• redistribute – redistributes routes from one routing domain to another routing domain.
• isis metric – configures a metric for an interface.
• metric-style – sets the metric style for the router.
• show isis database – displays the IS-IS link state database.
description
Enter a description of the IS-IS routing protocol.
S5000
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the IS-IS protocol (80 characters
maximum).
Defaults none
Command Modes ROUTER ISIS
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
router isis – Enter ROUTER mode on the switch.
distance
Define the administrative distance for learned routes.
S5000
Syntax
distance weight [ip-address mask [prefix-list]]
To return to the default values, use the no distance weight command.
Parameters
weight The administrative distance value indicates the reliability of a routing
information source. The range is 1 to 255. (A higher relative value
761