Command Line Reference Guide
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default information.
S5000
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
To disable the generation of a default route into the specified IS-IS routing domain, use the no
default-information originate [always] [metric metric] [route-
map
map-name] command.
Parameters
always (OPTIONAL) Enter the keyword always to have the default route
always advertised.
metric
metric
(OPTIONAL) Enter the keyword metric followed by a number to
assign to the route. The range is 0 to 16777215.
route-map
map-
name
(OPTIONAL) A default route is generated by the routing process if the
route map is satisfied.
Defaults Not configured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you use this command to redistribute routes into a routing domain, the router becomes
an autonomous system (AS) boundary router. An AS boundary router does not always generate
a default route into a routing domain. The router still requires its own default route before it can
generate one.
How a metric value assigned to a default route advertises depends on the metric-style
command configuration. If the metric-style command is set for Narrow mode and the
760