Command Line Reference Guide
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
debug isis spf-triggers
Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging purposes.
S5000
Syntax
debug isis spf-triggers
To turn off debugging, use the no debug isis spf-triggers command.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
debug isis update-packets
Enable debugging on link state PDUs (LSPs) that are detected by a router.
S5000
Syntax
debug isis update-packets [interface-type slot/port]
To turn off debugging, use the no debug isis update-packets [interface-
type slot/port] command.
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
759