Command Line Reference Guide

debug isis local-updates
Enables debugging on a specific interface and provides diagnostic information to debug IS-IS local update packets.
S5000
Syntax
debug isis local-updates [interface]
To turn off debugging, use the no debug isis local-updates [interface]
command.
Parameters
interface (OPTIONAL) Identifies the interface type slot/port as one of the
following:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number. The range is 1 to 128.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
debug isis snp-packets
Enable debugging on a specific interface and provides diagnostic information to debug IS-IS complete sequence
number PDU (CSNP) and partial sequence number PDU (PSNP) packets.
S5000
Syntax
debug isis snp-packets [interface-type slot/port]
To turn off debugging, use the no debug isis snp-packets [interface-type
slot/port
] command.
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
758