Command Line Reference Guide
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
S5000
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag
(Optional) Enter an alphanumeric string to specify the IS-IS routing
tag area.
* Enter the keyword * to clear all IS-IS information and restart the IS-IS
process. This command removes IS-IS neighbor information and IS-IS
LSP database information and the full SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system
IDs.
S5000
Syntax
clns host name nsap
Parameters
name
Enter an alphanumeric string to identify the name-to-NSAP mapping.
nsap
Enter a specific NSAP address that is associated with the name
parameter.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to configure a shortcut name that you can use instead of entering a long
string of numbers associated with an NSAP address.
Related
Commands
hostname dynamic – enables dynamic learning of host names from routers in the domain and
allows the routers to advertise the host names in LSPs.
756