Command Line Reference Guide
Related
Commands
• show iscsi – displays the currently configured iSCSI settings.
• show iscsi session detailed – displays detailed information about active iSCSI sessions
on the switch.
• show run iscsi – shows run iscsi.
show iscsi session detailed
Display detailed information on active iSCSI sessions on the switch.
S5000
Syntax
show iscsi session detailed [session isid]
Parameters
isid
Enter the session’s iSCSi ID to display detailed information about the
specified iSCSi session.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS# show iscsi session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCPPort ID
10.10.0.44 33345 10.10.0.101 3260 0
Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCPPort ID
10.10.0.53 33432 10.10.0.101 3260 0
Related
Commands
• show iscsi – displays the currently configured iSCSI settings.
• show iscsi session – displays information about active iSCSI sessions on the switch.
750