Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
iscsi target port
Configure the iSCSI target ports and optionally, the IP addresses on which iSCSI communication is monitored.
S5000
Syntax
iscsi target port [tcp-port-2...tcp-port-16]ip-address [ip-
address]
To remove the configured iSCSI target ports or IP addresses, use the no iscsi target
port command.
Parameters
tcp-
port-2...tcpport-
16
Enter the tcp-port number of the iSCSI target ports. The tcp-port-
n
is the TCP port number or a list of TCP port numbers on which the
iSCSI target listens to requests. Separate port numbers with a
comma. The default is 860, 3260.
ip-address
(Optional)
Enter the ip-address that the iSCSI monitors. The ip-address specifies
the IP address of the iSCSI target.
Defaults 860, 3260
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can configure up to 16 target TCP ports on the switch in one command or multiple
commands.
When you use the no iscsi target port command and the TCP port to be deleted is
one bound to a specific IP address, the IP address value must be included in the command.
show iscsi
Display the currently configured iSCSI settings.
S5000
Syntax
show iscsi
Command Modes
• EXEC
• EXEC Privilege
748