Command Line Reference Guide

show ip bgp ipv6 unicast peer-group
Allows you to view information on the BGP peers in a peer group.
S5000
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
summary (OPTIONAL) Enter the keyword summary to view status information
of the peers in that peer group. The output is the same as that found
in the show ip bgp ipv6 unicast summary command.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp ipv6 unicast summary
Allows you to view the status of all BGP connections.
S5000
Syntax
show ip bgp ipv6 unicast summary
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp ipv6 unicast summary command shown
in the Example below.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
742