Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show ip bgp ipv6 unicast flap-statistics
BGP table version is 8, local router ID is 5.5.10.4
Status codes: s suppressed, S stale, d damped, h history, *
valid, > best Path
source: I - internal, a - aggregate, c - confed-external, r -
redistributed, n -
network Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
h dead:1::/100 5ffe:10::3 1 00:03:20 1 i
h dead:1::/100 5ffe:11::3 1 00:03:20 1 i
h dead:4::/100 5ffe:10::3 1 00:04:39 1 i
h dead:4::/100 5ffe:11::3 1 00:04:39 1 i
FTOS#
show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from
the same neighbor AS but with a different AS-Path.
S5000
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
S5000
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length
[advertised-routes | dampened-routes | detail | flap-statistics
| routes]]
738