Command Line Reference Guide

• set ipv6 next-hop
If the route map is not configured, the default is deny (to drop all
routes).
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you do not configure the default-metric command, in addition to the redistribute
command, or there is no route map to set the metric, the metric for redistributed static and
connected is “0”.
To redistribute the default route (0::0/0), configure the neighbor default-
originate command.
Related
Commands
neighbor default-originate – injects the default route.
show ip bgp ipv6 unicast
View the current MBGP route table.
S5000
Syntax
show ip bgp ipv6 unicast [network [network-mask] [length]]
Paramters
network (OPTIONAL) Enter the network address (in dotted decimal format) of
the BGP network to view information only on that network.
network-mask (OPTIONAL) Enter the keywords network mask (in slash prefix
format) of the BGP network address.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp ipv6 unicast command shown in the
Example below.
Field Description
732