Command Line Reference Guide

debug ip bgp ipv6 unicast peer-group updates
View information about BGP peer-group updates.
S5000
Syntax
debug ip bgp ipv6 unicast peer-group peer-group-name updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast peer-group
peer-group-name updates [in | out] command.
Parameters
peer-group
peer-
group-name
Enter the keywords peer-group followed by the name of the peer-
group.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
debug ip bgp ipv6 unicast updates
View information about BGP updates.
S5000
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates
[in | out]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
722