Command Line Reference Guide

ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap
dampening information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the
flap statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members
of a peer-group.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
S5000
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network
(OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format.
network-mask
If you enter the network address, next enter the network mask, from 0
to 128.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp ipv6 flap-statistics
Clear BGP flap statistics, which includes the number of flaps and the time of the last flap.
S5000
Syntax
clear ip bgp ipv6 unicast flap-statistics [network | filter-
list list |regexp regexp
720