Command Line Reference Guide

show ip bgp ipv6 unicast neighbors
Displays information on IPv6 unicast routes exchanged by BGP neighbors.
S5000
Syntax
show ip bgp ipv6 unicast neighbors [ipv4-neighbor-addr | ipv6-
neighbor-addr] [advertised-routes | dampened-routes | detail |
flap-statistics | routes | received-routes [network [network-
mask]] | denied-routes [network [network-mask]]]
Parameters
ipv6 unicast Enter the keywords ipv6 unicast to view information only
related to IPv6 unicast routes.
ipv4-neighbor-
addr | ipv6-
neighbor-addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP
route information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
received-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords received-routes followed by
either the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information received from
neighbors.
NOTE: The neighbor soft-reconfiguration
inbound command must be configured prior to viewing all the
information received from the neighbors.
denied-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords denied-routes followed by
either the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information on routes denied
using neighbor inbound filters.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
708