Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6
unicast summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp ipv6 unicast community command without any parameters lists
BGP routes with at least one BGP community attribute and the output is the same as for the
show ip bgp ipv6 unicast command output.
show ip bgp ipv6 unicast filter-list
View the routes that match the filter lists.
S5000
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name
Enter the name of an AS-PATH.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
show ip bgp ipv6 unicast flap-statistics
View flap statistics on BGP routes.
S5000
Syntax
show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-
length] [filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
706