Command Line Reference Guide

router bgp
Enter ROUTER BGP mode to configure and enable BGP.
S5000
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
as- number Enter the AS number. The range is 1 to 65535.
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address on the S5000.
S5000
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Defaults
• EXEC
• EXEC Privilege
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Command
capture bgp-pdu neighbor (ipv6) – enables capture of an IPv6 BGP neighbor packet.
capture bgp-pdu max-buffer-size – specifies a size for the capture buffer.
701