Command Line Reference Guide
show running-config
Display the current configuration and display changes from the default values.
S5000
Syntax
show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) Enter one of the keywords listed below to display that
entity’s current (non-default) configuration:
NOTE: If nothing is configured for that entity, nothing is displayed
and the prompt returns.
aaa
for the current AAA configuration
acl
for the current ACL configuration
arp
for the current static ARP configuration
as-path
for the current AS-path configuration
bfd
for the current BFD configuration
bgp
for the current BGP configuration
boot
for the current boot configuration
cam-profile
for the current CAM profile in the
configuration
class-map
for the current class-map configuration
community-
list
for the current community-list configuration
ecmp-group
for the current ECMP group configuration
ethernet
for the current Ethernet CFM configuration
fefd
for the current FEFD configuration
ftp
for the current FTP configuration
frrp
for the current FRRP configuration
fvrp
for the current FVRP configuration
gvrp
for the current GVRP configuration
host
for the current host configuration
hardware-
monitor
for hardware-monitor action-on-error
settings
hypervisor
for the current hypervisor configuration
igmp
for the current IGMP configuration
interface
for the current interface configuration
ip
for the current IP configuration
70