Command Line Reference Guide

NOTE: Reset the neighbor connection (the capture bgp-pdu max-buffer-size
* command) to apply the weight to the connection and recompute the best path.
neighbor X:X:X::X password
Enable TCP MD5 Authentication for an IPv6 BGP peer session.
S5000
Syntax
neighbor x:x:x::x password {7 <encrypt-pass> | <clear-pass}
To return to the default setting, use the no neighbor x:x:x::x password command.
Parameters
encrypt-pass Enter the encrypted password.
clear-pass Enter the clear text password.
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The TCP session is authentication and prevents the data from being compromised.
network
Specify the networks for the BGP process and enter them in the BGP routing table.
S5000
Syntax
network ipv6-address prefix-length [route-map map-name]
To remove a network, use the no network ip-address mask [route-map map-
name
] command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
mask Enter the mask of the IP address in the slash prefix length format (for
example, /24). The mask appears in command outputs in dotted
decimal format (A.B.C.D).
696