Command Line Reference Guide

Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
By default, when a neighbor/peer group configuration is created in the Router BGP context, it
is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the new context, the
neighbor/peer group is enabled for AFI/SAFI.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
S5000
Syntax
neighbor {ipv6-address | peer-group-name} advertisement-
interval seconds
To return to the default value, use the no neighbor {ipv6-address | peer-
group-name} advertisement-interval command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
seconds Enter a number as the time interval, in seconds, between BGP
advertisements. The range is 0 to 600 seconds. The default is 5
seconds for internal BGP peers and 30 seconds for external BGP
peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 9.0(1.3) Introduced on the S5000.
679