Command Line Reference Guide

debug ip bgp keepalives
Allows you to view information about BGP keepalive messages.
S5000
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group followed by the name
of the peer group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive
messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive
messages.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Entering a no debug ip bgp command removes all configured debug commands for BGP.
debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
S5000
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] notifications [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
674