Command Line Reference Guide

debug ip bgp events
Allows you to view information on local BGP state changes and other BGP events.
S5000
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] events
[in | out]
To disable debugging, use the no debug ip bgp ipv6-address | peer-group
peer-group-name] events command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group peer-
group-name
Enter the keywords peer-group followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
out (OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Entering a no debug ip bgp command removes all configured debug commands for BGP.
debug ip bgp ipv6 dampening
View information on dampened (non-active) IPv6 routes.
S5000
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
in (OPTIONAL) Enter the keyword in to view only inbound dampened
routes.
out (OPTIONAL) Enter the keyword out to view only outbound dampened
routes.
672