Command Line Reference Guide
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you enter the clear ip bgp ipv6 flap-statistics command without any
parameters, all statistics are cleared.
Related
Commands
show ip bgp ipv6 unicast flap-statistics – views BGP flap statistics.
clear ip bgp ipv6 unicast soft
Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform BGP soft
reconfiguration.
S5000
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-
neighbor-addr | peer-group name} ipv6 unicast soft [in | out]
Parameters
* Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the AS. The
range is 0 to 65535 (2-Byte) 1 to 4294967295 (4-Byte) or 0.1 to .
65535.65535 (Dotted format).
ipv4-neighbor-
addr
|
ipv6-
neighbor-addr
Clear and reapply policies for a neighbor.
peer-group
name
Clear and reapply policies for all BGP routers in the specified peer
group.
ipv6 unicast Clear and reapply policies for all IPv6 unicast routes.
in Reapply only inbound policies.
NOTE: If you enter soft, without an in or out option, both
inbound and outbound policies are reset.
out Reapply only outbound policies.
NOTE: If you enter soft, without an in or out option, both
inbound and outbound policies are reset.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
670