Command Line Reference Guide
multicast (OPTIONAL) Enter the keyword multicast to select the multicast
option within the selected address family. Multicast is supported on
IPv4 only.
soft (OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session; that is, BGP Soft
Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address soft,
both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound
policies.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
S5000
Syntax
clear ip bgp peer-group peer-group-name
Parameters
peer-group
peer-
group-name
Enter the keyword peer-group followed by the peer group name to
reset the BGP sessions within that peer group.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp ipv6 dampening
Clear information on route dampening and return suppressed route to active state.
S5000
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
668