Command Line Reference Guide

ipv4 multicast
soft [in | out]
(OPTIONAL) Enter the keywords ipv4 multicast soft [in
| out] to set options within the specified IPv4 address family.
ipv6 unicast soft
[in | out]
(OPTIONAL) Enter the keywords ipv6 multicast soft [in
| out] to set options within the specified IPv6 address family.
soft (OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address soft,
both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound
policies.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp as-number
Reset BGP sessions on the S5000. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting
the TCP connection.
S5000
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics
| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
Parameters
as-number Enter an autonomous system (AS) number to reset neighbors
belonging to that AS. If used without a qualifier, the keyword resets
all neighbors belonging to that AS. The range is 0 to 65535 (2-byte), 1
to 4294967295 (4-byte), or 0.1 to 65535.65535 (dotted format).
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all
flap statistics belonging to that AS or a specified address family
within that AS.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that
address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that
address family.
unicast (OPTIONAL) Enter the keyword unicast to select the unicast option
within the selected address family.
666