Command Line Reference Guide

show capture bgp-pdu neighbor – configures a route reflector and clients.
capture bgp-pdu neighbor (ipv6)
Enable capture of an IPv6 BGP neighbor packet.
S5000
Syntax
capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv6-address command.
Parameters
ipv6-address
Enter the IPv6 address of the target BGP neighbor.
direction {both |
rx | tx}
Enter the keyword direction and a direction— either rx for
inbound, tx for outbound, or both.
Defaults Not configured.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
capture bgp-pdu max-buffer-size – enables route reflection between the route reflector and
the clients.
show capture bgp-pdu neighbor – configures a route reflector and clients.
capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category on the S5000. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
S5000
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast
soft [in | out] | soft [in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
665