Command Line Reference Guide
If you enable this command, use the capture bgp-pdu max-buffer-size *
command to recompute the best path.
bgp bestpath med missing-as-best
During path selection, indicate a preference to paths with missing MED (MULTI_EXIT_DISC) over those paths with an
advertised MED attribute.
S5000
Syntax
bgp bestpath med missing-as-best
To return to the default selection, use the no bgp bestpath med missing-as-best
command.
Defaults Disabled.
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The MED is a 4-byte unsigned integer value and the default behavior is to assume a missing
MED as 4294967295. This command causes a missing MED to be treated as 0. During path
selection, paths with a lower MED are preferred over those with a higher MED.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
S5000
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
Defaults Enabled when a route reflector is configured.
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Route reflection to clients is not necessary if all client routers are fully meshed.
Related
Commands
bgp cluster-id – assigns and ID to a BGP cluster with two or more route reflectors.
654