Command Line Reference Guide

ipv6 name-server
Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order of their use.
S5000
Syntax
ipv6 name-server ipv6-address [ipv6-address2... ipv6-address6]
Parameters
ipv6-address Enter the IPv6 address (X:X:X:X::X) of the name server to be used.
ipv6-address2...
ipv6-address6
Enter up five more IP addresses, in dotted decimal format, of name
servers to be used. Separate the addresses with a space.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can separately configure both IPv4 and IPv6 domain name servers.
ipv6 nd dad attempts
Configure the number of neighbor solicitation messages that are sent to perform duplicate address detection (DAD) on
the management interface.
S5000
Syntax
ipv6 nd dad attempts {number of attempts}
To restore the default value, use the no ipv6 nd dad attempts command.
Parameters
number of
attempts
Enter the number of attempts to be made to detect a duplicate
address The range is 0 to 15. Setting the value to 0 disables DAD on
the interface.
Default 3 attempts
Command Modes INTERFACE (management interface only)
Command History
Version 9.0(1.3) Introduced on the S5000.
639