Command Line Reference Guide

unit
--------------------------------------------------------------
4| 0| IPv4Flow| 232| 0| Allowed
4| 0| IPv6Flow| 0| 0| Allowed
FTOS#
FTOS#test cam-usage service-policy input pmap_12 stack-unit 2
port-set 1
Stack-| Portpipe| CAM Partn| Avail CAM| Est CAM/Port| Status
unit
---------------------------------------------------------------
2| 1| IPv4Flow| 232| 0| Allowed
2| 1| IPv6Flow| 0| 0| Allowed
FTOS#
IPv6 Route Map Commands
The following commands allow you to configure route maps and their redistribution criteria.
match ipv6 address
Configure a filter to match routes based on IPv6 addresses specified in an access list.
S5000
Syntax
match ipv6 address prefix-list-name
To delete a match, use the no match ipv6 address prefix-list-name command.
Parameters
prefix-list-name
Enter the name of IPv6 prefix list, up to 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match ipv6 next-hop – redistributes routes that match the next-hop IP address.
match ipv6 route-source – redistributes routes that match routes advertised by other routers.
629