Command Line Reference Guide

Command Modes ACCESS-LIST
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS(conf-ipv6-acl)#show config
!
ipv6 access-list Acl1
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count
bytes
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
FTOS(conf-ipv6-acl)#
show ipv6 accounting access-list
View the IPv6 access-lists created on the S5000 and the sequence of filters.
S5000
Syntax
show ipv6 accounting {access-list access-list-name | cam_count}
interface type slot/port
Parameters
access-list-name Enter the name of the ACL to be displayed, up to 140 characters.
cam_count List the count of the CAM rules for this ACL.
interface type
slot/port
Enter the interface keyword followed by the interface type and
slot/port or number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
626