Command Line Reference Guide

vlan range (OPTIONAL) Enter the keyword vlan followed by the VLAN range in
a comma separated format. The range is 1 to 4094.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can assign an IPv6 access group to a physical, LAG, or VLAN interface context.
Example
FTOS(conf-if-te-9/0)#ipv6 access-group AclList1 in implicit-
permit vlan 10-20
FTOS(conf-if-te-9/0)#show config
!
interface TenGigabitEthernet 9/0
no ip address
ipv6 access-group AclList1 in implicit-permit Vlan 10-20
no shutdown
FTOSconf-if-te-9/0)#
ipv6 control-plane egress-filter
Enable egress Layer 3 ACL lookup for IPv6 CPU traffic.
S5000
Syntax
ipv6 control-plane egress-filter
Defaults Not enabled.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
ipv6 access-list
Configure an access list based on IPv6 addresses or protocols.
S5000
Syntax
ipv6 access-list access-list-name
To delete an access list, use the no ipv6 access-list access-list-name
command.
613