Command Line Reference Guide
Parameters
source address
Enter the IPv6 address of the network or host from which the packets
were sent in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128. The :: notation specifies successive
hexadecimal fields of zero.
mask
Enter a network mask in /prefix format (/x).
any Enter the keyword any to specify that all routes are subject to the
filter.
host
ipv6-address
Enter the keyword host followed by the IPv6 address of the host in
the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zero. Only one occurrence of this notation is permitted in an IPv6
address.
destination
address
Enter the IPv6 address of the network or host to which the packets
are sent in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128. The :: notation specifies successive
hexadecimal fields of zero.
count (OPTIONAL) Enter the keyword count to count packets processed
by the filter.
byte (OPTIONAL) Enter the keyword byte to count bytes processed by
the filter.
log (OPTIONAL) Enter the keyword log to have the information kept in an
ACL log file.
monitor (OPTIONAL) Enter the keyword monitor to monitor traffic on the
monitoring interface specified in the flow-based monitoring session
along with the filter operation.
Defaults Not configured.
Command Modes ACCESS-LIST
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The information below lists the keywords displayed in the CLI help and their corresponding
ICMP Message Type Name.
Table 7. Keywords for ICMP Message Type Names
Keyword ICMP Message Type Name
dest-unreachable Destination unreachable.
echo Echo request (ping).
echo-reply Echo reply.
inverse-nd-na Inverse neighbor discovery advertisement.
inverse-nd-ns Inverse neighbor discovery solicitation.
607