Command Line Reference Guide

Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
For the new settings to take effect, you must save the new CAM settings to the startup-config
(write-mem or copy run start), then reload the system.
The total amount of space allowed is 16 FP Blocks. System flow requires three blocks and
these cannot be reallocated.
When configuring space for IPv6 ACLs, the total number of Blocks must equal 13.
Ranges for the CAM profiles are 1-10, except for the ipv6acl profile which is 0-10. The
ipv6acl allocation must be a factor of 2 (2, 4, 6, 8, 10).
Example
FTOS#
FTOS#configure
FTOS(conf)#cam-acl-egress ?
default Reset Egress CAM ACL entries to default setting
l2acl Set L2-ACL entries
FTOS(conf)#cam-acl-egress l2acl ?
<1-4> Number of FP blocks for l2acl
FTOS(conf)#cam-acl-egress l2acl 1 ?
ipv4acl Set IPV4-ACL entries
FTOS(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ?
ipv6acl Set IPV6-ACL entries
FTOS(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ipv6acl ?
<0-4> Number of FP blocks for IPV6 (multiples of 2)
FTOS(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ipv6acl 2
clear counters ipv6 access-group
Erase all counters maintained for the IPv6 access lists.
S5000
Syntax
clear counters ipv6 access-group [access-list-name]
Parameters
access-list-name
(OPTIONAL) Enter the name of a configured access-list, up to 140
characters.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
605