Command Line Reference Guide

25 control
packets...
Displays the number of control packets sent and the number
retransmitted.
11603 data
packets...
Displays the number of data packets sent.
24 data packets
retransmitted
Displays the number of data packets resent.
355 ack.. Displays the number of acknowledgement packets sent and the
number of packet delayed.
0 window probe... Displays the number of window probe and update packets sent.
0 Connections
initiated...
Displays the number of TCP connections initiated, accepted, and
established.
15 Connections
closed...
Displays the number of TCP connections closed, dropped.
12 Total rxmt... Displays the number of times the switch tried to re-send data and the
number of connections dropped during the TCP retransmit timeout
period.
0 Keepalive.... Lists the number of keepalive packets in timeout, the number
keepalive probes and the number of TCP connections dropped during
keepalive.
Example
FTOS#show tcp stat
Rcvd: 10585 Total, 0 no port
0 checksum error, 0 bad offset, 0 too short
329 packets (1263 bytes) in sequence
17 dup packets (6 bytes)
0 partially dup packets (0 bytes)
7 out-of-order packets (0 bytes)
0 packets ( 0 bytes) with data after window
0 packets after close
0 window probe packets, 41 window update packets
41 dup ack packets, 0 ack packets with unsend data
10184 ack packets (12439508 bytes)
Sent: 12007 Total, 0 urgent packets
25 control packets (including 24 retransmitted)
11603 data packets (12439677 bytes)
24 data packets (7638 bytes) retransmitted
355 ack only packets (41 delayed)
0 window probe packets, 0 window update packets
0 Connections initiated, 15 connections accepted, 15
connections established
15 Connections closed (including 14 dropped, 0 embryonic
dropped)
12 Total rxmt timeout, 1 connections dropped in rxmt timeout
0 Keepalive timeout, 0 keepalive probe, 0 Connections dropped
in keepalive
FTOS#
Related
Commands
show ip cam stack-unit – displays the CAM table.
602