Command Line Reference Guide

list
prefix-list
(OPTIONAL) Enter the keyword list and the name of a configured
prefix list. For more information, refer to the show ip route list
command.
protocol
(OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf,
rip) or the keywords connected or static.
If you enter ospf, you can include the OSPF process-id
process-id
(OPTIONAL) Specify that only OSPF routes with a certain process ID
must be displayed.
routing-tag
(OPTIONAL) Specify that only ISIS routes with a certain routing tag
must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly
connected routes.
all (OPTIONAL) Enter the keyword all to view both active and non-
active routes.
static (OPTIONAL) Enter the keyword static to view only routes
configured by the
ip route command.
summary (OPTIONAL) Enter the keyword summary. For more information,
refer to the
show ip route summary command.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes output for the show ip route all command in the Example
below.
Field Description
(undefined) Identifies the type of route:
C = connected
S = static
R = RIP
B = BGP
IN = internal BGP
EX = external BGP
LO = Locally Originated
O = OSPF
IA = OSPF inter area
N1 = OSPF NSSA external type 1
N2 = OSPF NSSA external type 2
E1 = OSPF external type 1
595