Command Line Reference Guide

Parameters
inspection (OPTIONAL) Enter the keyword inspection followed by
database or statistics to view dynamic ARP inspection
details.
interface type
slot/port
(OPTIONAL) Enter the interface keyword followed by the
interface type and slot/port or number information. Valid slot numbers
are 0-11. The valid port numbers for each interface type are listed
below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip followed by an IP address in the
dotted decimal format. Enter the optional IP address mask in the slash
prefix format (/ x).
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword macaddress followed by a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional MAC address
mask in nn:nn:nn:nn:nn format also.
retries (OPTIONAL) Enter the keyword retries to view the number of ARP
retries before a 20 sec back off.
static (OPTIONAL) Enter the keyword static to view entries entered
manually.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP
entries.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The Example below shows two VLANs that are associated with a private VLAN (PVLAN) (refer
to Private VLAN (PVLAN)).
The following describes the show arp command shown in the Example below.
Row Heading Description
Protocol Displays the protocol type.
582