Command Line Reference Guide

ip domain-name
Configure one domain name for the switch.
S5000
Syntax
ip domain-name name
To remove the domain name, use the no ip domain-name command.
Parameters
name
Enter one domain name to be used to complete unqualified names
(that is, incomplete domain names that cannot be resolved).
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can only configure one domain name with the ip domain-name command. To
configure more than one domain name, configure the
ip domain-list command up to six
times.
Use the following steps to enable dynamic resolution of hosts:
specify a domain name server with the ip name-server command
enable DNS with the ip domain-lookup command
To view current bindings, use the show hosts command.
Related
Commands
ip domain-list – configures additional names.
ip helper-address
Specify the address of a DHCP server so that DHCP broadcast messages can be forwarded when the DHCP server is not
on the same subnet as the client.
S5000
Syntax
ip helper-address ip-address
To remove a DHCP server address, use the no ip helper-address command.
Parameters
ip-address
Enter an IP address in dotted decimal format (A.B.C.D).
Defaults Not configured.
Command Modes INTERFACE
572