Command Line Reference Guide

Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must be in INTERFACE mode before you add an IP address to an interface. Assign an IP
address to an interface prior to entering ROUTER OSPF mode.
ip directed-broadcast
Enables the interface to receive directed broadcast packets.
S5000
Syntax
ip directed-broadcast
To disable the interface from receiving directed broadcast packets, use the no ip
directed-broadcast
command.
Defaults Disabled (that is, the interface does not receive directed broadcast packets)
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
ip domain-list
Configure names to complete unqualified host names.
S5000
Syntax
ip domain-list name
To remove the name, use the no ip domain-list name command.
Parameters
name Enter a domain name to be used to complete unqualified names (that
is, incomplete domain names that cannot be resolved).
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Configure the ip domain-list command up to six times to configure a list of possible
domain names.
If you configure both the ip domain-name and ip domain-list commands, the
software tries to resolve the name using the
ip domain-name command. If the name is not
570