Command Line Reference Guide
Command History
Version 9.0(1.3) Introduced on the S5000.
debug arp
View information on ARP transactions.
S5000
Syntax
debug arp [interface-type slot/port] [count value]
To stop debugging ARP transactions, use the no debug arp command.
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
count
value
(OPTIONAL) Enter the keyword count followed by the count value.
The range is 1 to 65534.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the count option to stop packets from flooding the user terminal when debugging is
turned on.
564